Tera Pump TRHA03 Liquid Transfer Pump with Auto-Stop and Buzzer
"Lightweight and extremely portable, love the auto stop feature. A great pump to keep handy." - T. Mullins
Need An Easier Way To Transfer Fuel and Liquids?
Introducing: The NEW TeraPump TRHA03…
✅ Flow Rate of 2.4 Gallons per Minute
✅ Intake Tube Length: 15.5 in
✅ Discharge Hose Length of 18 in + 5.5 in Nozzle
✅ Auto-Stop Sensor & Auto-Buzzer: Sounds when pump Automatically stops
✅ Requires 2 "AA" Batteries (Not Included)
TRANSFER FUEL TO:
✅ Lawn Mowers
✅ Tractors / Heavy Equipment
✅ Snow Blowers / Snow Throwers
✅ Snow Mobiles
✅ Jet Ski's
✅ Fuel Powered Generators
✅ Water (NOT for Drinking Water)
✅ Light Oils
❌ NOT COMPATIBLE WITH:
Drinking Water, Hot Water, Acetone, Benzen, Creosol, Ethylphenol, Methylethyl, Concentrated Caustic Soda Liquid, Nitric Acid, Hydrochloric Acid, Sulfuric Acid, Thinners, Solvents, etc.
ABOUT THE TERAPUMP TRHA03
The TERA PUMP TRHA03 is an affordable BATTERY OPERATED fuel transfer pump designed for quick and easy emptying of gas cans of various sizes.
The TRHA03 eliminates wasting fuel and the need to lift large, heavy, gas cans.
- 2.4 GPM Fuel Transfer Pump
- Transferring fuel and liquid can be a pain! Safely use this portable TRHA03 Battery Powered Siphon Pump to transfer or empty gas cans, tanks, barrels, drums, carboys, IBCs, etc.
- The TERA PUMP TRHA03 is an affordable battery powered liquid transfer pump designed for quick and easy emptying of gas cans of various sizes.
- Up and down operated flexible spring type bellows allow smooth operation and high powered discharge.
- FUEL TRANSFER PUMP Features
- Battery Loading Slot: Simple Slide off mechanism
- Simple Power Switch: Switch to on and you're ready to go
- Auto-Buzzer: Sounds when pump Automatically stops
- Auto-Stop Sensor Mechanism: Pump warns when it is at capacity, Protecting from leaks and liquid overflow
- Suction Type: Battery Powered Liquid Transfer Pump
- Battery Operated: Uses only 2 AA Alkaline Batteries (NOT Included)
- Dimensions: 21.5 x 4.5 x 2 Inches
- Weight: 4 LBS
- Delivery Volume: 10 Quarts / Min or 2.4 Gallons per Minute. Increased suctioning power with impeller head
- Application Liquids: Any Non-Corrosive Liquids such as gas, diesel and water (NOT for Drinking Water), etc...
- HOW TO OPERATE
- 1. Immerse the suction end of the pump into the liquid (ex. Gas Can)
- 2. Insert the tube into a container to receive the liquid
- 3. Turn the pump on. Caution: Do Not overfill the container. Avoid pumping liquid to a container higher than the pump's motor housing
- 4. When finished, keep the pump upright and lift the handle above the pump mechanism to drain any liquid back into the original container. Do Not lay pump down until all liquid has been drained from the tube and pump.
- 5. Run water through the pump after using it with any other liquid. This will rinse the interior and extend the life of the pump.
*GAS CAN NOT INCLUDED*